Single-Source Single-Stage Acetylene Manifold MM70-1
Technical Grade Manifolds
The Druva MM70-1 1 m3 series single-source single-stage acetylene manifold features a manual quick-acting shut-off device for efficient and safe gas management.
Single-Source Single-Stage Acetylene Manifold MM70-1Introduction
The Druva MM70-1 is a single-stage gas manifold designed for industrial applications that require acetylene. Its manual shut-off device at the inlet pressure side enables the operators to quickly halt the gas supply in case of emergency. This acetylene manifold is rigorously tested to meet international safety standards, so you can peacefully focus on the task at hand.
Single-Source Single-Stage Acetylene Manifold MM70-1Introduction
The Druva MM70-1 is a single-stage gas manifold designed for industrial applications that require acetylene. Its manual shut-off device at the inlet pressure side enables the operators to quickly halt the gas supply in case of emergency. This acetylene manifold is rigorously tested to meet international safety standards, so you can peacefully focus on the task at hand.
Single-Source Single-Stage Acetylene Manifold MM70-1Features
- Manual quick-acting shut-off device at the inlet pressure side, complying with ISO 15615.
- Pressure regulator was developed and manufactured according to ISO 7291 standards, including the acetylene decomposition test.
- Complete manifold undergoes electrostatic chargeability testing:
- Meets requirements of ISO 80079-36, IEC TS 60079-32-1, and German TRGS 727.
- Suitable for use in EX areas (zones 1 and 2) for gases in explosion risk groups I, IIA, IIB, and IIC.
Single-Source Single-Stage Acetylene Manifold MM70-1Features
- Manual quick-acting shut-off device at the inlet pressure side, complying with ISO 15615.
- Pressure regulator was developed and manufactured according to ISO 7291 standards, including the acetylene decomposition test.
- Complete manifold undergoes electrostatic chargeability testing:
- Meets requirements of ISO 80079-36, IEC TS 60079-32-1, and German TRGS 727.
- Suitable for use in EX areas (zones 1 and 2) for gases in explosion risk groups I, IIA, IIB, and IIC.
Single-Source Single-Stage Acetylene Manifold MM70-1Gallery & Videos
Single-Source Single-Stage Acetylene Manifold MM70-1General properties
General properties
| Product Line | druvaTEC - Central Gas Systems |
|---|---|
| Material (main body) | Brass |
| Connectors and fittings material | Brass |
| Diaphragm material | EPDM |
| Seat sealing material | Chloroprene |
| Wall bracket | Stainless steel |
| Maximum Inlet Pressure (bar/psi) | 25 (363) |
| Maximal flow rate | 1 Nm3/h |
| Temperature range | from -20°C to 60 °C |
| Manifold Type | One source |
| Regulation Type | Single stage |
| Applications | Industry, Marine |
Configurations
Loading... ... loading table ... |
| Column 1 | Column 2 | Column 3 | Column 4 | Column 5 | Column 6 |
|---|---|---|---|---|---|
| F27310033 | A | with automatic quick-acting shut-off device according to ISO 14114-2018 | 25-1.5 / 363-22 | W21,8×1/14“LH male | G1/2” male |
| 0768111 | A | with manual quick-acting shut-off device according to ISO 14114-2014 | 25-1.5 / 363-22 | W21,8×1/14“LH male | G1/2” male |
Quality Standards
We comply with all relevant regulations
See our CERTIFICATIONS >Single-Source Single-Stage Acetylene Manifold MM70-1Downloads
Related products
Find our Products
Source our products wherever you are
You can have confidence in our global network
Copyright © 2025 GCE. All rights reserved.
GCE Group
Turmstrasse 30
6321 Steinhausen
Zug
Switzerland
